Problem with GETVPN

Unanswered Question

Hello Guys


Pls Have a look to the Attached config,and Help me to solve the below issue



R3#ping 239.1.1.1 source loopback 0 repeat 4


Type escape sequence to abort.
Sending 4, 100-byte ICMP Echos to 239.1.1.1, timeout is 2 seconds:
Packet sent with a source address of 150.1.3.3
....




R3#ping 150.1.4.4                          


Type escape sequence to abort.
Sending 5, 100-byte ICMP Echos to 150.1.4.4, timeout is 2 seconds:
!!!!!
Success rate is 100 percent (5/5), round-trip min/avg/max = 1/27/76 ms
R3#

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 5 (1 ratings)
Loading.
Ganesh Hariharan Wed, 05/05/2010 - 22:42
User Badges:
  • Purple, 4500 points or more
  • Community Spotlight Award,

    Member's Choice, February 2016

Hello Guys


Pls Have a look to the Attached config,and Help me to solve the below issue



R3#ping 239.1.1.1 source loopback 0 repeat 4


Type escape sequence to abort.
Sending 4, 100-byte ICMP Echos to 239.1.1.1, timeout is 2 seconds:
Packet sent with a source address of 150.1.3.3
....




R3#ping 150.1.4.4                          


Type escape sequence to abort.
Sending 5, 100-byte ICMP Echos to 150.1.4.4, timeout is 2 seconds:
!!!!!
Success rate is 100 percent (5/5), round-trip min/avg/max = 1/27/76 ms
R3#

Hi,


What is the routing update you are receving for 239.1.1.1 in R3.


Ganesh.H

Actions

This Discussion