LACP limit number of links bubdled

Unanswered Question
May 6th, 2010
User Badges:

Is there a command to limit the number of links that we want bundled in an LACP etherchannel or is the limit always 8 as default? I want to test with 4 ports in the bundle with priority 100 and a 5th port with a higher priority. I want to test how the 5th port will join the etherchannel once one of the four active links fail. But as of now even the 5th port has a higher priority it becomes part of the etherchannel... that's whay i am looking for a command to limith the etherchannel to 4 links.

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
Loading.
Edison Ortiz Thu, 05/06/2010 - 13:41
User Badges:
  • Super Bronze, 10000 points or more
  • Hall of Fame,

    Founding Member

The 5th port will join the channel but it should be on 'Hot-Standby' mode. Please supply the output from the show ether
channel summary
command.


Please note; the connected device must also be configured this way.

Actions

This Discussion