IOS AP and SSID scan

Jan Nejman · ‎05-07-2010

Hello,

I have AP with IOS. Do you know how to get the list of SSIDes that AP is receiving (listening)?

I need the same feature as SSID list which you can see when you are connecting on windows.

In better case a list with signal strength. Maybe there is there some monitoring mode....? I tried

show controller dot 0 etc, but without success. It looks that Cisco AP doesn't support this feature.

Kind regards,

Jan

Leo Laohoo · ‎05-10-2010

Is this what you are looking for: "sh dot11 bssid"

Don't forget to rate useful ports. Thanks.

Jan Nejman · ‎05-11-2010

Hello,

it is not what I need. This displays only my SSIDes, but I need to get

list of all SSIDes that my AP is seeing/listening. I need to get a rogue ssid

list. In our area, there are many AP (my neighbors). I need to see,

which APes (in my neighborhood) are announcing SSIDed and their signal strength.

The same job do a software tool 'netstumbler'...

Kind regards,

Jan Nejman

Leo Laohoo · ‎05-11-2010

How about this: sh iapp rogue-ap-list

Jan Nejman · ‎05-12-2010

Hello,

when I tried the command above, I get an empty list... See the result.

BaseAP#sh iapp rogue-ap-list
IAPP Rogue AP List:
The Rogue AP list is empty

Any other tips?

Kind regards,

Jan Nejman

Leo Laohoo · ‎05-12-2010

You'll get better result if you use a WLC. Without a WLC, how are you going to "triangulate" the rogue AP/Client? DO you want to contain them? Without a WLC, how do you expect to achieve this?