05-07-2010 03:21 PM - edited 03-21-2019 02:32 AM
Hello,
I've been attempting to update my SPA942 from 4.1.18 to 6.1.5.
I confirmed that 'Upgrade Enable' is set to yes.
I tried 3 methods.
1. I ran upg-spa942-6-1-5a.exe. I was on the same subnet as the phone with firewall set to off. The upgrade failed.
2. I did an update to a local tftp server, requesting the update from the browser. I got the message below, and then when the phone rebooted, it comes back up with firmware version 4.1.18. (http://192.168.0.5/upgrade?tftp://192.168.0.2/spa.bin).
3. I did an upgrade via web browser. I got the message below, and then when the phone rebooted, it comes back up with firmware version 4.1.18. (http://192.168.0.5/upgrade?http://192.168.0.2/tools/spa.bin).
Message:
SPA will upgrade to the new firmware when it is not in use.
Fast blinking of the Status LED indicates that firmware upgrade is in progress.
Please do NOT unplug the power while the Status LED blinking rapidly.
You can click basic or advanced to return to the configuration page when upgrade is completed.
Please advise.
Please advise.
Thanks,
Dave
05-10-2010 10:49 AM
Please try updating to 5.2.5 or 5.2.8 first before going to 6.1.5a.
Link is
05-10-2010 12:43 PM
That worked. Thank you. -Dave
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide