05-07-2010 06:06 PM - edited 03-06-2019 10:59 AM
Hi,
i got 2 3500 series XL switches for labing. I already know that I can't use int range for configs because of the old IOS 12-0-5.WC17, its actually the highest one that can run on it, memory limitations for higher IOS i gather.
Anyway, is there a way to add portfast to all access ports on this so i don't have to do it manually for all ports. Thanks
Solved! Go to Solution.
05-07-2010 06:24 PM
Hi,
There is no other way. You have to do it one at the time for each interface since the interface range is not available
HTH
Reza
05-07-2010 06:24 PM
Hi,
There is no other way. You have to do it one at the time for each interface since the interface range is not available
HTH
Reza
05-07-2010 07:33 PM
not even a global command or nothing, ok
05-07-2010 08:14 PM
I see the command globally on IOS 12.1(11)
have a look:
05-07-2010 08:21 PM
can you try this:
Switch(config)# spanning-tree portfast bpduguard
05-07-2010 08:30 PM
yea i was gonna tell you it had both guard and filter but not default in global. defualt is the one im looking for. In order to use guard, portfast has to be enabled. I was hoping for a miracle to have better way of one by one int. IOS limitation confirmed, thanks anyway
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: