cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
304
Views
0
Helpful
1
Replies

remote vpn not coming up

Hi

I am jjust seettig up an remote vpn,butg issue is that my client when asked for authentication i enter the userid/passowrd but after that the session gets disconnected.

What can be the problemm

I am attaching the loggs and config

which i think related to the issue:


Error : Received unsupported transaction mode attribute: 5

May 08 15:47:44 [IKEv1]: Group = RVPN_GRP, Username = secvpn, IP = 192.168.1.5, QM IsRekeyed old sa not found by addr

May 08 15:47:44 [IKEv1]: Group = RVPN_GRP, Username = secvpn, IP = 192.168.1.5, All IPSec SA proposals found unacceptable!

I have attached the config.

1 Reply 1

Hi,

The error is right here:

All IPSec SA proposals found unacceptable

Not sure why you have those settings on phase 2.

Do the following:

Change the current crypto ipsec transform-set to:

esp-des esp-md5-hmac

Also, change the DH Group of the ISAKMP policy to group 2

Federico.

Review Cisco Networking products for a $25 gift card