I got an 2801 with a PVDM2-32 on slot 0 that its gave me this error %PVDM2-1-SIMM_UNKNOWN: PVDM2 in slot 0: PVDM SIMM in subslot/pvdm slot 0
what its the right IOS to support this PVDM2-32 Module ?
Its suppoorted by Cisco Router 2801 the pvdm2-32 module?
Any ideas ?
System returned to ROM by reload at 03:57:43 UTC Sun May 9 2010
System image file is "flash:c2801-adventerprisek9-mz.124-25a.bin"
Cisco 2801 (revision 7.0) with 235520K/26624K bytes of memory.
Processor board ID FTX13088XAT
2 FastEthernet interfaces
2 Channelized E1/PRI ports
1 Virtual Private Network (VPN) Module
DRAM configuration is 64 bits wide with parity disabled.
191K bytes of NVRAM.
62720K bytes of ATA CompactFlash (Read/Write)
Configuration register is 0x2102