CME GUI files

Answered Question
May 10th, 2010
User Badges:

Hi,


I try to access to CME GUI "http://IP_Address/ccme.html" after I login by username and password it shows nothing blank page. I think there is no files for CME GUI on flash. I have attach show version, dir flash:, show telephony-service.


thank you

Correct Answer by Aaron Harrison about 7 years 2 months ago

Hi


The actually call processing part of CME is built into the IOS.


The GUI is downloaded separately, just be sure that you download the correct version for your version of IOS.. check what you have against this sheet, then get the GUI files from the download pages (www.cisco.com/go/software)


http://www.cisco.com/en/US/docs/voice_ip_comm/cucme/requirements/guide/3...


Regards


Aaron


Please rate helpful posts..

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 5 (1 ratings)
Loading.
Correct Answer
Aaron Harrison Mon, 05/10/2010 - 05:33
User Badges:
  • Super Bronze, 10000 points or more
  • Community Spotlight Award,

    Member's Choice, May 2015

Hi


The actually call processing part of CME is built into the IOS.


The GUI is downloaded separately, just be sure that you download the correct version for your version of IOS.. check what you have against this sheet, then get the GUI files from the download pages (www.cisco.com/go/software)


http://www.cisco.com/en/US/docs/voice_ip_comm/cucme/requirements/guide/3...


Regards


Aaron


Please rate helpful posts..

Walter Solano Mon, 05/10/2010 - 06:08
User Badges:
  • Gold, 750 points or more

Hi,


Checking the information that uploaded, I dont see the GUI files in the flash, so what you need to do is download the proper GUI files for you CME and upload those to the routers flash.

After that you need to indicate to the router where to look for those files using the "ip http server" and "ip http path" comand and that should be it.


This link explains how to enable this:


https://www.cisco.com/en/US/docs/voice_ip_comm/cucme/admin/configuration/guide/cmegui.html


And this one explains how to access it and use it:


http://www.cisco.com/en/US/docs/voice_ip_comm/cucme/gui/user/guide/cmegui_user.pdf


HTH



Walter Solano

CCNA Voice

Cisco UCCX Specialist

Actions

This Discussion