cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
404
Views
0
Helpful
5
Replies

Digit Manipulation on calls from OCS

efrazee
Level 1
Level 1

I have a Microsfot OCS server connected to my CUCM 6.1 server via a SIP trunk in CUCM.

OCS sends the + sign on calls into the cisco. I want to remove the + and replace it with a 9.

Thank you

5 Replies 5

htluo
Level 9
Level 9

Uou should be able to strip/prefix digits on CUCM > Device > Trunk > Inbound Calls.

Michael

http://htluo.blogspot.com

Call Routing Information

Inbound Calls


Forgive me if I am missing something here but this is from the CUCM > Device > Trunk > Inbound Calls. and I dont see where I would strip the + and add a 9.

Strip => "Significant Digits"

Prefix => "Prefix DN"

Michael

Not all calls coming accross the SIP trunk have a leading + sign. I only want to strip it from the calls that do. The other issue i have is that I only want to add the 9 to the calls that have the + removed. Can I do this in CUCM or and I going to need CUBE/gateway to do that?

I think you should consider "Number Normalization" on OCS.  It's very difficult for CUCM to handle the inconsistnecy from the same source.

Michael

Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: