AIR-RM1252G-E-K9 changing from lightweight to autonomous?

Unanswered Question
May 10th, 2010
User Badges:

Hi Everyone



I have a AIR-RM1252G-E-K9 access point which is in lightweight mode but need to change it to autonomous mode. After doing a bit of googling i understand its as simple as tftp'ing over an autonomous image.  Ive found a link below which states that i need version 12.3 or earlier:


http://www.cisco.com/en/US/docs/wireless/access_point/conversion/lwapp/upgrade/guide/lwapnote.html#wp161272


However i can only find images for this access point starting from 12.4.


Can anyone just clear things up for me and perhaps point me in the right direction?


thanks

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
Loading.
dancampb Mon, 05/10/2010 - 11:58
User Badges:
  • Cisco Employee,

You can load any image to convert it back to IOS.

Leo Laohoo Mon, 05/10/2010 - 15:26
User Badges:
  • Super Gold, 25000 points or more
  • Hall of Fame,

    The Hall of Fame designation is a lifetime achievement award based on significant overall achievements in the community. 

  • Cisco Designated VIP,

    2017 LAN, Wireless


However i can only find images for this access point starting from 12.4.

Don't take everything literally.  WAP 1250 IOS always starts with 12.4.  What's IOS version number (only) written on the documentation is purely as-an-example only.


The procedure is correct as I always direct people to it.  The IOS version number is for the 1230 WAP.


Please don't forget to rate our useful posts.  Thanks.

faghouri83 Tue, 05/11/2010 - 03:25
User Badges:

Thanks for the informations guys but i have a problem..........



I downloaded the image c1250-k9w7-tar.124-21a.JA1.tar. I want to enable DHCP but i cant do this. Can anyone help me out with this?



Thanks

Leo Laohoo Tue, 05/11/2010 - 19:45
User Badges:
  • Super Gold, 25000 points or more
  • Hall of Fame,

    The Hall of Fame designation is a lifetime achievement award based on significant overall achievements in the community. 

  • Cisco Designated VIP,

    2017 LAN, Wireless


I downloaded the image c1250-k9w7-tar.124-21a.JA1.tar. I want to enable DHCP but i cant do this. Can anyone help me out with this?

Hmmmm ... It's either I don't understand what is your problem or something else.  For starters, 12.4(21a)JA1 supports the AP being a simple DHCP server:


WAP(config)#ip dhcp pool ?
WORD  Pool name


Next, you said you've "downloaded" the IOS.  Can you post the output of "sh version" please?

Actions

This Discussion

 

 

Trending Topics: Other Wireless Mobility

client could not be authenticated
Network Analysis Module (NAM) Products
Cisco 6500 nam
reason 440 driver failure
Cisco password cracker
Cisco Wireless mode