3750 QoS metro-ethernet

niro · ‎05-11-2010

Can someone please verify that my QoS settings are correct? I'm prioritizing VoIP traffic (DSCP 46/COS5) over a 100Mb Layer 2 metro ethernet line, the phones are all Avaya VoIP phones. The reason I'm asking is that the voice quality is terrible and I think the problem is at the provider and not on my equipment. I verified that VoIP traffic (and only VoIP) has DSCP 46 marking with a packet capture.

Here are the relevent configs:

interface GiabitEthernet 2/0/24

bandwidth 100000

srr-queue bandwidth share 10 10 60 20

queue-set 2

priority-queue out

mls qos trust dscp

mls qos map cos-dscp 0 8 16 24 32 46 48 56

mls qos srr-queue input bandwidth 90 10

mls qos srr-queue input threshold 1 8 16

mls qos srr-queue input threshold 2 34 66

mls qos srr-queue input buffers 67 33

mls qos srr-queue input cos-map queue 1 threshold 2 1

mls qos srr-queue input cos-map queue 1 threshold 3 0

mls qos srr-queue input cos-map queue 2 threshold 1 2

mls qos srr-queue input cos-map queue 2 threshold 2 4 6 7

mls qos srr-queue input cos-map queue 2 threshold 3 3 5

mls qos srr-queue input dscp-map queue 1 threshold 2 9 10 11 12 13 14 15

mls qos srr-queue input dscp-map queue 1 threshold 3 0 1 2 3 4 5 6 7

mls qos srr-queue input dscp-map queue 1 threshold 3 32

mls qos srr-queue input dscp-map queue 2 threshold 1 16 17 18 19 20 21 22 23

mls qos srr-queue input dscp-map queue 2 threshold 2 33 34 35 36 37 38 39 48

mls qos srr-queue input dscp-map queue 2 threshold 2 49 50 51 52 53 54 55 56

mls qos srr-queue input dscp-map queue 2 threshold 2 57 58 59 60 61 62 63

mls qos srr-queue input dscp-map queue 2 threshold 3 24 25 26 27 28 29 30 31

mls qos srr-queue input dscp-map queue 2 threshold 3 40 41 42 43 44 45 46 47

mls qos srr-queue output cos-map queue 1 threshold 3 5

mls qos srr-queue output cos-map queue 2 threshold 3 3 6 7

mls qos srr-queue output cos-map queue 3 threshold 3 2 4

mls qos srr-queue output cos-map queue 4 threshold 2 1

mls qos srr-queue output cos-map queue 4 threshold 3 0

mls qos srr-queue output dscp-map queue 1 threshold 3 40 41 42 43 44 45 46 47

mls qos srr-queue output dscp-map queue 2 threshold 3 24 25 26 27 28 29 30 31

mls qos srr-queue output dscp-map queue 2 threshold 3 48 49 50 51 52 53 54 55

mls qos srr-queue output dscp-map queue 2 threshold 3 56 57 58 59 60 61 62 63

mls qos srr-queue output dscp-map queue 3 threshold 3 16 17 18 19 20 21 22 23

mls qos srr-queue output dscp-map queue 3 threshold 3 32 33 34 35 36 37 38 39

mls qos srr-queue output dscp-map queue 4 threshold 1 8

mls qos srr-queue output dscp-map queue 4 threshold 2 9 10 11 12 13 14 15

mls qos srr-queue output dscp-map queue 4 threshold 3 0 1 2 3 4 5 6 7

mls qos queue-set output 1 threshold 1 138 138 92 138

mls qos queue-set output 1 threshold 2 138 138 92 400

mls qos queue-set output 1 threshold 3 36 77 100 318

mls qos queue-set output 1 threshold 4 20 50 67 400

mls qos queue-set output 2 threshold 1 149 149 100 149

mls qos queue-set output 2 threshold 2 118 118 100 235

mls qos queue-set output 2 threshold 3 41 68 100 272

mls qos queue-set output 2 threshold 4 42 72 100 242

mls qos queue-set output 1 buffers 10 10 26 54

mls qos queue-set output 2 buffers 16 6 17 61

niro · ‎05-11-2010

I should add that the port is configured as a layer 3 port with an IP (I left out those config lines as I didn't think they'd be relevant).

Thanks!

spremkumar · ‎05-12-2010

Hi Niro

I think you are using some kinda template there which you are using in all your switchports and applied the same onto this port as well.

As far as i know once the traffic comes out of L2 to L3 you need to make use of PQ/CBWFQ techniques to prioritize the voice and guarantee bandwidth to other traffic.

Have you negotiated the class maps / QoS policies with your SP, it does matter that your SP honours and carry forward your QoS settings throughout his network and deliver the same @ remote end. Atleast he needs to match your traffic priorities with his internal maps.

Untill otherwise this is there in place you cant expect a quality voice transaction between the locations.

regds