To Group :
i have 1242 AG and 3524 inline power POE switch and using poe injector for AP
.My AP was running fine but suddenly
i m getting following error
Mar 1 00:00:23.340: %CDP_PD-2-POWER_LOW: All radios disabled -
LOW_POWER_CLASSIC_NO_INJECTOR_CONFIGURED WS-C3524-PWR-XL (000a.f4f2.28c1)
Mar 1 00:00:23.340: -Verify the required power-injector is installed on this
port: WS-C3524-PWR-XL(Fas 0/1).
Mar 1 00:00:23.341: -If a power-injector is installed, issue the
command:"power inline negotiation injector installed"
how to resolve it one thing no anteena install still having error
I have this problem too.
Correct Answer by Leo Laohoo about 7 years 1 month ago
Go "conf t" and then enter the command "power in neg i i". You'll get an message and at the end is a MAC address. Next you enter the command "power in neg i ". Save your config.
Don't forget to rate useful posts.