Sw 4507R-E_Configuration - Instalation

Answered Question
May 11th, 2010
User Badges:

Hey Guys, in this opportunity, i need some help with this Switch. Does anyone has a quick manual for configuration e installation of this switch. Also i would like a graphics, or some images of this switch for knowing. Any link or doc that you recommend will help me.


I have to change varios sw 3750, and replace them with this switchcore. Any tips to do this, would be wonderfull.


I really appreciate your comments,

Regards

Correct Answer by Ganesh Hariharan about 7 years 2 months ago

Hey Guys, in this opportunity, i need some help with this Switch. Does anyone has a quick manual for configuration e installation of this switch. Also i would like a graphics, or some images of this switch for knowing. Any link or doc that you recommend will help me.


I have to change varios sw 3750, and replace them with this switchcore. Any tips to do this, would be wonderfull.


I really appreciate your comments,

Regards

Hi,


Check out the below links on 4500 series switches :-


http://www.cisco.com/en/US/docs/switches/lan/catalyst4500/hardware/module/guide/01overvw.html


http://www.cisco.com/en/US/docs/switches/lan/catalyst4500/hardware/installation/guide/78-14409-08/03instal.html


http://www-europe.cisco.com/en/US/docs/switches/lan/catalyst4500/12.2/37sg/configuration/guides/pwr_envr.html


Hope to help !!


Ganesh.H


Remember to rate the helpful post

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 5 (1 ratings)
Loading.
Correct Answer
Ganesh Hariharan Tue, 05/11/2010 - 22:51
User Badges:
  • Purple, 4500 points or more
  • Community Spotlight Award,

    Member's Choice, February 2016

Hey Guys, in this opportunity, i need some help with this Switch. Does anyone has a quick manual for configuration e installation of this switch. Also i would like a graphics, or some images of this switch for knowing. Any link or doc that you recommend will help me.


I have to change varios sw 3750, and replace them with this switchcore. Any tips to do this, would be wonderfull.


I really appreciate your comments,

Regards

Hi,


Check out the below links on 4500 series switches :-


http://www.cisco.com/en/US/docs/switches/lan/catalyst4500/hardware/module/guide/01overvw.html


http://www.cisco.com/en/US/docs/switches/lan/catalyst4500/hardware/installation/guide/78-14409-08/03instal.html


http://www-europe.cisco.com/en/US/docs/switches/lan/catalyst4500/12.2/37sg/configuration/guides/pwr_envr.html


Hope to help !!


Ganesh.H


Remember to rate the helpful post

Actions

This Discussion

Related Content