no snmp data on vlan (cisco 6509 with native ios)

Unanswered Question
May 12th, 2010
User Badges:

Hi guys,

We are having troubles with one of our cisco 6509 switches (with native IOS) which acts
as MPLS router. We don't get SNMP counter values anymore (at least not
all of them). We have a second identical MPLS router (same model, same
IOS image) which does not have any problems at all,
what we already did:
- reload
- os upgrade

In the following graph, you can see that we don't get any counter
values any more (red coloured text): (I am sorry for the language, but
you should be able to get the important part without german skills)
http://img405.imageshack.us/img405/5517/snmpmpls6509counters.png

MTRG graph says that this suddenly started in May 2009:
http://img190.imageshack.us/img190/8217/mrtgn.png


We already checked the changes, but we could not find anything special.


At the moment, we are out of options. We could replace the sup720, but
I am not sure if this has any effect (each 6509 switch as two sup720,
so I guess it would not be a problem).


Any other ideas? Thanks

best regards

peter

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
Loading.
David Stanford Wed, 05/12/2010 - 06:10
User Badges:
  • Cisco Employee,

If you manually poll index value 164 do you see results??

Peter Gastinger Wed, 05/12/2010 - 06:20
User Badges:

No, unfortunately not:


snmpget -v2c -c snmpsecret mpls-6509-1  IF-MIB::ifOutOctets.164
IF-MIB::ifOutOctets.164 = Counter32: 0
snmpget -v2c -c snmpsecret mpls-6509-1  IF-MIB::ifInOctets.164
IF-MIB::ifInOctets.164 = Counter32: 0


I does not matter from where and from which tool I try to poll these values. The second (working) 6509-switch is in the same network and it worked until May 2009. Then it suddenly stopped.

David Stanford Wed, 05/12/2010 - 06:25
User Badges:
  • Cisco Employee,

Can you do a walk of ifTable and make sure .164 still corresponds to the correct interface?

Peter Gastinger Wed, 05/12/2010 - 07:20
User Badges:

mpls-6509-1#sh snmp mib ifmib ifindex vlan 811
Interface = Vlan811, Ifindex = 164


snmpwalk -v2c -c secret mpls-6509-1  IF-MIB::ifDescr | grep 811
IF-MIB::ifDescr.164 = STRING: Vlan811
IF-MIB::ifDescr.168 = STRING: unrouted VLAN 811
IF-MIB::ifDescr.296 = STRING: Vlan811-mpls layer



snmpwalk -v2c -c secret mpls-6509-1  IF-MIB::ifOutOctets.164
IF-MIB::ifOutOctets.164 = Counter32: 0
snmpwalk -v2c -c secret mpls-6509-1  IF-MIB::ifOutOctets.168
IF-MIB::ifOutOctets.168 = Counter32: 2450516191
snmpwalk -v2c -c secret mpls-6509-1  IF-MIB::ifOutOctets.296
IF-MIB::ifOutOctets.296 = Counter32: 0


snmpwalk -v2c -c secret mpls-6509-rhw1  IF-MIB::ifTable | grep ".164"
IF-MIB::ifIndex.164 = INTEGER: 164
IF-MIB::ifDescr.164 = STRING: Vlan811
IF-MIB::ifType.164 = INTEGER: propVirtual(53)
IF-MIB::ifMtu.164 = INTEGER: 9216
IF-MIB::ifSpeed.164 = Gauge32: 430000000
IF-MIB::ifPhysAddress.164 = STRING: 0:14:1b:f:10:0
IF-MIB::ifAdminStatus.164 = INTEGER: up(1)
IF-MIB::ifOperStatus.164 = INTEGER: up(1)
IF-MIB::ifLastChange.164 = Timeticks: (21766) 0:03:37.66
IF-MIB::ifInOctets.164 = Counter32: 0
IF-MIB::ifInUcastPkts.164 = Counter32: 0
IF-MIB::ifInNUcastPkts.164 = Counter32: 828938
IF-MIB::ifInDiscards.164 = Counter32: 0
IF-MIB::ifInErrors.164 = Counter32: 0
IF-MIB::ifInUnknownProtos.164 = Counter32: 0
IF-MIB::ifOutOctets.164 = Counter32: 0
IF-MIB::ifOutUcastPkts.164 = Counter32: 0
IF-MIB::ifOutNUcastPkts.164 = Counter32: 0
IF-MIB::ifOutDiscards.164 = Counter32: 0
IF-MIB::ifOutErrors.164 = Counter32: 0


mpls-6509-1#sh int vlan 811
Vlan811 is up, line protocol is up
  Hardware is EtherSVI, address is 0014.1b0f.1000 (bia 0014.1b0f.1000)
  Description: desc
  Internet address is 172.20.7.34/30
  MTU 9216 bytes, BW 430000 Kbit, DLY 10 usec,
     reliability 255/255, txload 4/255, rxload 3/255
  Encapsulation ARPA, loopback not set
  Keepalive not supported
  Carrier delay is 0 msec
  ARP type: ARPA, ARP Timeout 04:00:00
  Last input 00:00:02, output 00:00:02, output hang never
  Last clearing of "show interface" counters 1d00h
  Input queue: 0/75/0/0 (size/max/drops/flushes); Total output drops: 0
  Queueing strategy: fifo
  Output queue: 0/40 (size/max)
  5 minute input rate 5473000 bits/sec, 1726 packets/sec
  5 minute output rate 8382000 bits/sec, 1736 packets/sec
  L2 Switched: ucast: 42865 pkt, 3030838 bytes - mcast: 9394 pkt, 883036 bytes
  L3 in Switched: ucast: 115724758 pkt, 47064512047 bytes - mcast: 0 pkt, 0 bytes mcast
  L3 out Switched: ucast: 117839759 pkt, 75707182712 bytes mcast: 0 pkt, 0 bytes
     115782031 packets input, 47067168127 bytes, 0 no buffer
     Received 9395 broadcasts (0 IP multicasts)
     0 runts, 0 giants, 0 throttles
     0 input errors, 0 CRC, 0 frame, 0 overrun, 0 ignored
     117912973 packets output, 75611995847 bytes, 0 underruns
     0 output errors, 0 interface resets
     0 output buffer failures, 0 output buffers swapped out


It is indeed the right interface, it is still there and it is transferring packets. We are just unable to get SNMP counters for ALL vlan interfaces on this switch. Every "real" interface (e.g. Gi1/46) is working as expected:


mpls-6509-1#sh snmp mib ifmib ifindex gi1/46
Interface = GigabitEthernet1/46, Ifindex = 46

snmpwalk -v2c -c secret mpls-6509-1  IF-MIB::ifOutOctets.46
IF-MIB::ifOutOctets.46 = Counter32: 2443388863

Peter Gastinger Tue, 05/18/2010 - 06:18
User Badges:

any other ideas? anyone?


In your opinion, is it worth a try to change the supervisor? Because we are using a dual sup setup, it would not be that big of a deal to try the other one, but there should be at least a small chance of success :-)

Actions

This Discussion