Hi All,

Any workaround is there to fix this issue.

CORE-2#sh module
Mod Ports Card Type                              Model              Serial No.
--- ----- -------------------------------------- ------------------ -----------
  2    6  Firewall Module                        WS-SVC-FWM-1       SAD10490BDH
  3   48  CEF720 48 port 1000mb SFP              WS-X6748-SFP       SAL09370CP8
  4    4  CEF720 4 port 10-Gigabit Ethernet      WS-X6704-10GE      SAL10425LKT
  5    2  Supervisor Engine 720 (Active)         WS-SUP720-BASE     SAD081900XG
  8   48  48 port 10/100/1000mb EtherModule      WS-X6148-GE-TX     SAD081504JT

Mod MAC addresses                       Hw    Fw           Sw           Status
--- ---------------------------------- ------ ------------ ------------ -------
  2  001a.2f00.52bc to 001a.2f00.52c3   4.0   7.2(1)       3.1(3)23     Ok
  3  0015.6251.7330 to 0015.6251.735f   1.5   12.2(14r)S5  12.2(33)SXI2 Ok
  4  0019.2f57.0ae0 to 0019.2f57.0ae3   2.5   12.2(14r)S5  12.2(33)SXI2 Ok
  5  000d.2910.6168 to 000d.2910.616b   3.1   7.7(1)       12.2(33)SXI2 Ok
  8  0011.2000.a334 to 0011.2000.a363   6.0   7.2(1)       12.2(33)SXI2 Ok

Mod  Sub-Module                  Model              Serial       Hw     Status
---- --------------------------- ------------------ ----------- ------- -------
  3  Centralized Forwarding Card WS-F6700-CFC       SAL09370DD6  2.0    Ok
  4  Centralized Forwarding Card WS-F6700-CFC       SAL10478SBQ  2.1    Ok
  5  Policy Feature Card 3       WS-F6K-PFC3A       SAD081806NR  2.3    Ok
  5  MSFC3 Daughterboard         WS-SUP720          SAD081808Z5  2.2    Ok
  8  IEEE Voice Daughter Card    WS-F6K-GE48-AF     SAD081802S5  1.0    Ok

Mod  Online Diag Status
---- -------------------
  2  Pass
  3  Pass
  4  Pass
  5  Pass
  8  Minor Error