Jumbo frames support between 3560E & 6509

Unanswered Question
May 12th, 2010
User Badges:

Hi


i'm tring to enable jumbo frames between 3560E (Access) & 6509E (Core)


for 6509E jumbo frames support MTU size

(config)#system jumbomtu ?
  <1500-9216>  Jumbo mtu size in Bytes, default is 9216


for 3560E  jumbo frames support MTU size

(config)#system mtu jumbo ?
  <1500-9198>  Jumbo MTU size in bytes



i need help to know what is the jumbo fram size supported ?


shall i use (9216) or (9198) or what exactly.


thanks

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 5 (1 ratings)
Loading.
francisco_1 Wed, 05/12/2010 - 04:23
User Badges:
  • Gold, 750 points or more

What is the line card on the 6500 connected to the C3560e switch. "show module".

francisco_1 Wed, 05/12/2010 - 04:34
User Badges:
  • Gold, 750 points or more

On the 3560E, the system MTU range is from 1500 to 9198 bytes. The max is 9198 byte. Use the "system mtu jumbo" globally to change it.


On the 6500 the following switching modules do not support Jumbo frame. When jumbo frame support is configured, these modules drop ingress frames larger than 8092 bytes


• WS-X6516-GE-TX when operating at 100 Mbps

• WS-X6148-RJ-45, WS-X6148-RJ-45V and WS-X6148-RJ21, WS-X6148-RJ21V

• WS-X6248-RJ-45 and WS-X6248-TEL

• WS-X6248A-RJ-45 and WS-X6248A-TEL •

  WS-X6348-RJ-45, WS-X6348-RJ45V and WS-X6348-RJ-21, WX-X6348-RJ21V, WS-X6548-GE-TX, WS-X6548V-GE-TX, WS-X6148-GE-TX, and WS-  X6148V-GE-TX "




post "show module" to identify what card you have on the Cat 6500.



Francisco.




WS-X67xx cards does support Jumbo frame up to 9000 bytes. Max is 9216 bytes per frame


Francisco

amjad.aljada Wed, 05/12/2010 - 12:22
User Badges:


hi


3560E is connected using WS-X6724-SFP 




Mod Ports Card Type                              Model              Serial No.

--- ----- -------------------------------------- ------------------ -----------

  1   24  CEF720 24 port 1000mb SFP              WS-X6724-SFP     

  2   24  CEF720 24 port 1000mb SFP              WS-X6724-SFP     

  4   48  CEF720 48 port 10/100/1000mb Ethernet  WS-X6748-GE-TX 

  5    5  Supervisor Engine 720 10GE (Active)    VS-S720-10G      

  7    4  CEF720 4 port 10-Gigabit Ethernet      WS-X6704-10GE    




Mod  Sub-Module                  Model              Serial       Hw     Status

---- --------------------------- ------------------ ----------- ------- -------

  1  Distributed Forwarding    Card WS-F6700-DFC3C   

  2  Distributed Forwarding     Card WS-F6700-DFC3C   

  4  Distributed Forwarding     Card WS-F6700-DFC3C   

  5  Policy Feature Card 3       VS-F6K-PFC3C     

  5  MSFC3 Daughterboard         VS-F6K-MSFC3    

  7  Distributed Forwarding      Card WS-F6700-DFC3C   

francisco_1 Thu, 05/13/2010 - 04:38
User Badges:
  • Gold, 750 points or more

On the 3560E, you can set system MTU range between 1500 to 9198 bytes by use the "system mtu jumbo" command.




On the 6500 the WS-X6724-SFP line card the maximum frame size is 9216 bytes.


Hope to help..




Francisco

Ganesh Hariharan Wed, 05/12/2010 - 22:37
User Badges:
  • Purple, 4500 points or more
  • Community Spotlight Award,

    Member's Choice, February 2016

Hi


i'm tring to enable jumbo frames between 3560E (Access) & 6509E (Core)


for 6509E jumbo frames support MTU size

(config)#system jumbomtu ?
  <1500-9216>  Jumbo mtu size in Bytes, default is 9216


for 3560E  jumbo frames support MTU size

(config)#system mtu jumbo ?
  <1500-9198>  Jumbo MTU size in bytes



i need help to know what is the jumbo fram size supported ?


shall i use (9216) or (9198) or what exactly.


thanks

Hi,


The default MTU size is 9216 bytes after you enable jumbo frame support on the individual port for 6500 series switches and for 3560 switches All Gigabit Ethernet interfaces support jumbo frames up to 9000 bytes.


Check out the below link for more information on Jumbo frame configuration on switches


http://www.cisco.com/en/US/products/hw/switches/ps700/products_configuration_example09186a008010edab.shtml


Hope to Help !!


Ganesh.H


Remember to rate the helpful post

Actions

This Discussion