catalyst 6500 Virtual Switching System VSS

Unanswered Question
  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
Loading.
jorge.calvo Thu, 05/13/2010 - 06:56

Hello Harry,

I have been providing support to one of my customers who has deployed a VSS in the Core and Distribution Layer on its Data Center. From what I have experienced until now, the VSS environment has provided a HA infrastucture with no capacity limitations and no issues at all until now. The MEC are working really fine.

If you want any specific information, please let me know.

Regards.

spremkumar Thu, 05/13/2010 - 07:47

Hi Harry

Based on my experience with VSS i would suggest you to go through compatibility matrix for the below things

- Line cards

- Service Modules

- OS in Service Modules

Before you start getting into actual implementation you better check through the prerequisites of having VSS with respect to the line cards and other service modules like FWSM/ACE etc.,

http://www.cisco.com/en/US/products/ps9336/products_tech_note09186a0080a7c837.shtml#req

http://www.cisco.com/en/US/docs/switches/lan/catalyst6500/ios/12.2SX/configuration/guide/vss.html#wp1053927

I have had a instance of running through rough weather because of the above points (a year back though :-)).

regds

Actions

This Discussion