WLC2125 + Stratix + multicast

Unanswered Question
May 13th, 2010
User Badges:

Hello,


I have a problem with my network architecture.


I have a two WLC2125

I have 10 lightweight access point

I have 45 access point Standalone in workgroup bridge


The device in back of 45 access point Standalone in workgroup bridge is a Stratix 8000 (Rockwell). They use multicat, UDP and common industrial protocol (CIP)


I have two questions:


1////


I must to activate the multicast. How can i activate the multicast in my workbridge, lightweight access point and WLC


In the WLC, when i activate the multicast in controler menu, he ask me (enter the IP address of the multicast group in the Multicast Group Address field.) but i don't no which. (WLC management, Stratix, ...?)



2////


My question is about the communication between lightweight and WLC. I would to reduce the time to discover the secondary WLC if the first one is shutdown.


Merci par avance,


Nicolas

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
Loading.

Actions

This Discussion

 

 

Trending Topics - Security & Network