05-13-2010 11:01 AM - edited 03-15-2019 10:45 PM
I am working with a new customer that had much of the install by another vendor, they have 2 gatekeepers, and a handleful of h323 gateways. It looks like all the dial peers are in the gateways not the gatekeeper, which from what I understand is backwards??? Also, we route calls from CUCM to ICM and CVP applications, I see in CUCM the route pattern pointing to the gatekeeper trunk, but do not understand how the gatekeeper know what to do with the calls. Any ideas?
05-13-2010 11:06 AM
I'd recommend you to read this:
http://www.cisco.com/en/US/partner/tech/tk1077/technologies_tech_note09186a00800a8928.shtml
HTH
java
If this helps, please rate
www.cisco.com/go/pdihelpdesk
05-13-2010 01:46 PM
Thanks for the link, here is the only config in our gatekeeper
gw-type-prefix 1#* default-technology
no shutdown
endpoint max-calls h323id x.x.x.x
Would this route any calls to this IP? I don't see where we are telling the numbers in CUCM to have a prefix of 1
05-14-2010 12:02 AM
Hello Seaman0555,
>> I don't see where we are telling the numbers in CUCM to have a prefix of 1
the CUCM will register to the gatekeeper as a gateway (terminal type gateway)
the line gw-type-prefix 1#* default-technology on GK
means that for all gateways registering without providing prefixes 1#* is assumed as the prefix
the H.323 trunk is a communication channel between CUCM servers and the gatekeeper where H.225 RAS messages are exchanged in order to perfom endpoint resolution. RAS = resolution Admission Status
Hope to help
Giuseppe
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: