Connecting HP flex-10 10gb CX4 to 6509

Unanswered Question
Reza Sharifi Thu, 05/13/2010 - 18:30
User Badges:
  • Super Bronze, 10000 points or more
  • Cisco Designated VIP,

    2017 LAN

Hi AG,


Yes it is possible.  On the HP the connector type is SFP and on the 6500 the connector type is SC, so you need an LC to SC fiber patch cord to connect the HP to Cisco. If the distance is short you need SR type Connector and cable if the distance is long then you need LR type connector and cable.


HTH

Reza

Leo Laohoo Thu, 05/13/2010 - 22:19
User Badges:
  • Super Gold, 25000 points or more
  • Hall of Fame,

    The Hall of Fame designation is a lifetime achievement award based on significant overall achievements in the community. 

  • Cisco Designated VIP,

    2017 LAN, Wireless

Cisco Catalyst 6500 Series 10 Gigabit Ethernet Interface Modules
http://www.cisco.com/en/US/prod/collateral/switches/ps5718/ps708/product_data_sheet09186a00801dce34.html


Don't forget to rate useful posts.  Thanks.

Actions

This Discussion

Related Content