cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
2337
Views
4
Helpful
4
Replies

Connecting HP flex-10 10gb CX4 to 6509

agil.infotech
Level 1
Level 1

I'd like to utilize the 10gb port on the HP flex-10 to connect to my 6509-E.

On the 6509-E, I have dual WS-SUP720-3B with a WS-x6516a-GBIC module.

Is it possible? If so, what will be required.

Many Thanks,

AG

4 Replies 4

Reza Sharifi
Hall of Fame
Hall of Fame

Hi AG,

Yes it is possible.  On the HP the connector type is SFP and on the 6500 the connector type is SC, so you need an LC to SC fiber patch cord to connect the HP to Cisco. If the distance is short you need SR type Connector and cable if the distance is long then you need LR type connector and cable.

HTH

Reza

To the 10gb ports on sup720?

ws-x6516a-gbic doesnt support 10gb

The sup is WS-SUP720-3B no 10gb ports.

Cisco Catalyst 6500 Series 10 Gigabit Ethernet Interface Modules
http://www.cisco.com/en/US/prod/collateral/switches/ps5718/ps708/product_data_sheet09186a00801dce34.html

Don't forget to rate useful posts.  Thanks.

Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: