Cisco 3750 Traffic Shaping based on pps

Unanswered Question
May 13th, 2010
User Badges:

Hi All,

I have been searching through the 3750 user manual looking for information on egress shaping from the 3750. I can only see references to bandwidth with SRR, there is no mechanism to shape large bursts of traffic. Unfortunately, we cannot police the traffic with storm-control, we need to queue the traffic. The traffic in question occurs for around 1 millisecond and sends around 400,00 packets/sec upstream to a device that can only support 320,000 packets/sec causing the upstream device to tail drop. We would prefer if the 3750 shaped it down to lets say 300,000 over 2 ms. Is this possible on the 3750?

Thanks in Advance,


  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)


This Discussion