05-13-2010 09:57 PM - edited 03-04-2019 08:29 AM
Hi!
I have a 2821 connected to two ISP with BGP. How can I configure dynamic load-balancing between two ISP (outgoing traffic) based on outgoing links loads?
Solved! Go to Solution.
05-13-2010 11:08 PM
Hello Paa,
you cannot do this with BGP only.
you would need optimized edge routing / Performance routing
see
http://www.cisco.com/en/US/docs/ios/oer/configuration/guide/12_4t/oer_12_4t_book.html
Hope to help
Giuseppe
05-13-2010 11:08 PM
Hello Paa,
you cannot do this with BGP only.
you would need optimized edge routing / Performance routing
see
http://www.cisco.com/en/US/docs/ios/oer/configuration/guide/12_4t/oer_12_4t_book.html
Hope to help
Giuseppe
05-14-2010 06:45 AM
Actually you can load-balance with BGP using the "BGP dmzlink-bw" feature.
although it doesn load-balance based on load, but based on bandwidth of the links to your SP.
HTH,
Nhat
05-14-2010 09:57 AM
Hello Nhat,
>> although it doesn load-balance based on load, but based on bandwidth of the links to your SP.
original poster had asked for a way to load balance outbound based on link load
I agree that BGP dmzlink-bw" feature may be of help in dealing with links of different speeds
Hope to help
Giuseppe
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: