BLF with PickUp- Changed in 7.1.3?

Unanswered Question
May 14th, 2010
User Badges:
  • Silver, 250 points or more

I had the following set up


Phone A 1234

Phone B 2222


Phone A wish to BLF phone B and be able to pickup Phone B when some cone alls 2222. When I tested it on 7.0 I only had to set the Subscribe CSS on Phone A to include  the Internal Partition and add DN 2222 as a BLF with the Call Pick up ticked- - All worked However we have re-tested with 7.1.3 and the feature seems to have changed. You now need to create two Pickup Groups A&B and assign DN 2222 to one and associate PUG A to PUG B- very messy.  Am I reading the 7.1.3 notes incorrect? Does anyone use BLF with Pickup in 7.1.x


thanks

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
Loading.
Rob Huffman Fri, 05/14/2010 - 05:44
User Badges:
  • Super Blue, 32500 points or more
  • Hall of Fame,

    Founding Member

  • Cisco Designated VIP,

    2017 IP Telephony, Unified Communications

Hi IPT,


Here is a relevant clip



**Note You do not always need to create another call pickup group. A pickup group can have itself as its association group.



CUCM 7.0 notes;


http://www.ciscosystems.cg/en/US/docs/voice_ip_comm/cucm/admin/7_0_1/ccmfeat/fscpickg.html#wp1095877


CUCM 7.1 notes;


http://www.ciscosystems.lt/en/US/docs/voice_ip_comm/cucm/admin/7_1_2/ccmfeat/fscpickg.html#wp1124599



Cheers!

Huff


Please support CSC Helps Haiti


https://supportforums.cisco.com/docs/DOC-8895


https://supportforums.cisco.com/docs/DOC-8727

iptuser55 Fri, 05/14/2010 - 06:21
User Badges:
  • Silver, 250 points or more

Hi Rob,


thanks for the reply I`ve seen the docs but I`m sure I did not have the do a PUG before

Actions

This Discussion