05-14-2010 06:46 AM - edited 03-06-2019 11:05 AM
Hi people,
I'm trying to configure a second vlan on my router.
That worked, but I can't find the commands to attach 2 of it's interfaces to this new vlan.
I would expect switchport access, but the newest ios doesn't give me this option.
I've put c850-advsecurityk9-mz.124-15.T13.bin on it.
Is there another .bin I need to use, am I using the wrong approach, or is it simply impossible to do??
Many thanks in advance
Solved! Go to Solution.
05-16-2010 02:44 AM
Won't help. The 850 supports only ONE VLAN. 870 and the latest routers, 860, 880 and 890 support multiple VLANs.
Don't forget to rate useful posts (even though I gave you bad news). Thanks.
05-14-2010 06:49 AM
Hi people,
I'm trying to configure a second vlan on my router.
That worked, but I can't find the commands to attach 2 of it's interfaces to this new vlan.
I would expect switchport access, but the newest ios doesn't give me this option.
I've put c850-advsecurityk9-mz.124-15.T13.bin on it.
Is there another .bin I need to use, am I using the wrong approach, or is it simply impossible to do??
Many thanks in advance
See the below link for vlan configuration on cisco 850 series
Hope to Help !!
Ganesh.H
05-16-2010 02:44 AM
Won't help. The 850 supports only ONE VLAN. 870 and the latest routers, 860, 880 and 890 support multiple VLANs.
Don't forget to rate useful posts (even though I gave you bad news). Thanks.
05-17-2010 01:02 AM
I was afraid of that, thanks for the confirmation.
05-17-2010 01:12 AM
Thanks for the ratings.
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: