voice and data vlans

Answered Question
May 14th, 2010
User Badges:

Hi Experts


I am new to voice need assistance


My scenario


I have a HP3500 curve in production

it has port 10 defined in data vlan 301 and

         port 12 defined in voice vlan 310


so i connected port 10 on HP 3500- port 1 on cisco 3650 switch

                      port 12 on HP 3500 - port 2 on cisco 3650 switch


what configuration is required on port 1 and port 2 on cisco 3650 switch

and the configuration on rest of the ports where the pcs or ip phones will go.

Thanks

Asif

Correct Answer by Rick Arps about 7 years 1 month ago

Set your port 1 to access vlan 301

Set your port 2 to access vlan 310


Set every other port to access vlan 301 and have a voice vlan of 310


That should look like:


int fa0/1

description Data VLAN uplink

switchport mode access

switchport access vlan 301


int fa0/2

description Voice VLAn uplink

switchport mode access

switchport access vlan 310


int range fa0/3 - 48

description User Access Ports

switchport mode access

switchport access vlan 301

switchport voice vlan 310


Hope this helps

Rick

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 5 (1 ratings)
Loading.
Correct Answer
Rick Arps Thu, 05/27/2010 - 06:22
User Badges:
  • Bronze, 100 points or more

Set your port 1 to access vlan 301

Set your port 2 to access vlan 310


Set every other port to access vlan 301 and have a voice vlan of 310


That should look like:


int fa0/1

description Data VLAN uplink

switchport mode access

switchport access vlan 301


int fa0/2

description Voice VLAn uplink

switchport mode access

switchport access vlan 310


int range fa0/3 - 48

description User Access Ports

switchport mode access

switchport access vlan 301

switchport voice vlan 310


Hope this helps

Rick

akhanwaterloo Fri, 05/28/2010 - 08:49
User Badges:

Thanks that explains very clearly


a quick question

i have 3650 with gig ports then this should be

int gig0/1 or the fa0/1 can also be used


Thanks

Asif

Rick Arps Fri, 05/28/2010 - 10:52
User Badges:
  • Bronze, 100 points or more

Yeah, if it's a 3560G switch use G0/x instead of Fa0/x



Rick

Actions

This Discussion