05-14-2010 08:56 AM - edited 03-19-2019 12:56 AM
Is there anyway in CUCM 7.1.3 to set a particular phone to not have an extension mobility logout timer, different from the settings in the service parameters? Are all extension mobility logout settings global? thanks
Solved! Go to Solution.
05-14-2010 04:12 PM
Global parameter. Applies cluster-wide to all EM-enabled phones.
Hailey
05-14-2010 09:15 AM
We have no built-in mechanish to do this per phone, the logout setting is for all EM users
HTH
java
If this helps, please rate
www.cisco.com/go/pdihelpdesk
05-14-2010 04:12 PM
Global parameter. Applies cluster-wide to all EM-enabled phones.
Hailey
12-19-2012 08:52 AM
Hi David / Java,
Old thread but I thought I would give it a try. I need to mod this EM Servive Parameter. Is it service impacting to any existing users who are logged in via EM?
TIA,
Amir
12-19-2012 08:56 AM
No, but changes will only affect phones that log in AFTER you change the value.
Phones that were logged before, will not take that change.
HTH
java
if this helps, please rate
www.cisco.com/go/pdihelpdesk
07-31-2013 03:54 AM
Hi Java,
Could you please point me where I can find that " Global parameter. Applies cluster-wide to all EM-enabled phones."
Thanks
07-31-2013 05:46 AM
Hi there,
You will find those settings via;
To set the Service Parameters for Cisco Extension Mobility, choose
System > Service Parameters in Cisco Unified Communications Manager Administration;
choose the server that is running the Cisco Extension Mobility service, and then Cisco Extension Mobility
.
Cheers!
Rob
"A smile relieves a heart that grieves"
- Stones
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide