Solved: Extension Mobility Timeout Per Phone?

steigja · ‎05-14-2010

Is there anyway in CUCM 7.1.3 to set a particular phone to not have an extension mobility logout timer, different from the settings in the service parameters? Are all extension mobility logout settings global? thanks

David Hailey · ‎05-14-2010

Global parameter. Applies cluster-wide to all EM-enabled phones.

Hailey

View solution in original post

Jaime Valencia · ‎05-14-2010

We have no built-in mechanish to do this per phone, the logout setting is for all EM users

HTH

java

If this helps, please rate

www.cisco.com/go/pdihelpdesk

HTH

java

if this helps, please rate

David Hailey · ‎05-14-2010

Global parameter. Applies cluster-wide to all EM-enabled phones.

Hailey

asafayan · ‎12-19-2012

Hi David / Java,

Old thread but I thought I would give it a try. I need to mod this EM Servive Parameter. Is it service impacting to any existing users who are logged in via EM?

TIA,

Amir

Jaime Valencia · ‎12-19-2012

No, but changes will only affect phones that log in AFTER you change the value.

Phones that were logged before, will not take that change.

HTH

java

if this helps, please rate

www.cisco.com/go/pdihelpdesk

HTH

java

if this helps, please rate

KY_ · ‎07-31-2013

Hi Java,

Could you please point me where I can find that " Global parameter. Applies cluster-wide to all EM-enabled phones."

Thanks

Rob Huffman · ‎07-31-2013

Hi there,

You will find those settings via;

To set the Service Parameters for Cisco Extension Mobility, choose

System > Service Parameters in Cisco Unified Communications Manager Administration;

choose the server that is running the Cisco Extension Mobility service, and then Cisco Extension Mobility

.

Cheers!

Rob

"A smile relieves a heart that grieves"

- Stones