Cat 6513 Not Applicable Module

Unanswered Question
May 14th, 2010

I have installed a new WS-X6816-GBIC card in slot 13 and i got this message:

%C6KPWR-SP-4-UNSUPPORTED: unsupported module in slot 13, power not allowed: The image for the card is not bundled in image.

I tried to reset the module (#hw-module module 13 reset) and i got this message:

% module 13 is operationally off (Linecard image not present)

Can you help with this?

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
Jon Marshall Sat, 05/15/2010 - 04:13


From the release notes -


WS-X6816-GBIC requires one of these for use with Supervisor Engine 720:

WS-F6K-DFC3BXL (adds 1.47 [email protected] V)

WS-F6K-DFC3B (adds 1.67 [email protected] V)

WS-F6K-DFC3A (adds 2.57 [email protected] V)

WS-X6816-GBIC requires WS-F6K-DFC for use with Supervisor Engine 2.

In a 13-slot chassis, WS-X6816-GBIC is supported only in slots 9 through 13 and does not power up in other slots.


ahmed.yacoob Sat, 05/15/2010 - 04:19

The formar one was WS-X6816-GBIC


This card is not working now, the TAC gave me this card WS-X6816-GBIC


and he told me the WS-X6816-DFC can be used as WS-X6816-GBIC with SUP 720 and there are no issues with it.


This Discussion