cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
868
Views
0
Helpful
2
Replies

COR

vip80y_cisco
Level 1
Level 1

Hi Expert...

There are 3 sites (A,B,C), site A connected to the public phone thru PSTN (PRI link). The case is how to restrict the incoming call from public phone number to reach only certain site using COR....

for example, incoming call from public phone number 7777 can only reach site B (not A and C), public phone number 8888 only can reach site C (not A and B )

please help

Thanks in advance

2 Replies 2

paolo bevilacqua
Hall of Fame
Hall of Fame

COR can be complicated.

Recommend you hire a reputable professional to make the configuration for you.

Aaron Harrison
VIP Alumni
VIP Alumni

Hi

There's a good example at this URL: http://www.cisco.com/en/US/tech/tk652/tk90/technologies_configuration_example09186a008019d649.shtml

Regards

Aaron

Please rate helpful posts...

Aaron Please remember to rate helpful posts to identify useful responses, and mark 'Answered' if appropriate!
Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: