4506 Lan Base to IP Base

Unanswered Question
May 17th, 2010
User Badges:

Hi Tech,


My customer is having one 4506 switch as core in their small building network with Lan Base IOS Version 12.2(53)SG1 and SUP WS-X45-SUP6L-E.

Currently they are using LAN Base IOS. In a few days they want to upgrade the chassis to IP Base software. What is the process to upgrade from LAN Base to IP Base. It will be very much helpful if anyone can provide me the process/document on these.


Thanks in advance.

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 1 (1 ratings)
Loading.
Leo Laohoo Mon, 05/17/2010 - 00:27
User Badges:
  • Super Gold, 25000 points or more
  • Hall of Fame,

    The Hall of Fame designation is a lifetime achievement award based on significant overall achievements in the community. 

  • Cisco Designated VIP,

    2017 LAN, Wireless

Firstly you need to get the service contract upgraded to allow your organization to use the IP Base software.

Ganesh Hariharan Mon, 05/17/2010 - 00:33
User Badges:
  • Purple, 4500 points or more
  • Community Spotlight Award,

    Member's Choice, February 2016

Hi Tech,


My customer is having one 4506 switch as core in their small building network with Lan Base IOS Version 12.2(53)SG1 and SUP WS-X45-SUP6L-E.

Currently they are using LAN Base IOS. In a few days they want to upgrade the chassis to IP Base software. What is the process to upgrade from LAN Base to IP Base. It will be very much helpful if anyone can provide me the process/document on these.


Thanks in advance.


Check out the below link for upgardation of ios in 4500 series switches


http://www.cisco.com/en/US/products/hw/switches/ps663/products_configuration_example09186a00801461ef.shtml


Hope to help !!


Ganesh.H


Remember to rate the helpful post

Actions

This Discussion