Mcafee ePO4 integration into CS-MARS

Unanswered Question
May 17th, 2010


CS-MARS Version details - 6.0.6 ( 3368 )

We have setup ePO4 and CS-MARS correctly as per cisco document but CS-MARS does not see any traps coming from ePo server. SNMPWALK is working fine. I have captured packet from ePO4 using tcpdump but no packets seen.

I think I am missing one thing configuring snmp community string to access/read traps on. I have check all the options, but I didnt find any setiing related to that one. I appreciate your assistance on this please. Thanks.

I have this problem too.
0 votes
  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
Jennifer Halim Mon, 05/17/2010 - 06:33

If you are not seeing any traps coming from ePO4, then you would need to check on ePO4 server itself on why it's not sending snmp traps.

MARS can only receive snmp traps, and if it's not being sent by the ePO server, there is much that can be done from MARS' perspective.

lekchandmantri Mon, 05/17/2010 - 07:40

Do I need to define SNMP community string in CS-MARS for ePO4 reporting device. Thanks in advance for your assistance.


This Discussion

Related Content