I`m trying to use AS5350 as an mgcp gateway.
This gateway have 2 NP108 (Nextport) and E1 8 PRI card in it.
I configured the all the E1 ports like this:
controller E1 2/0
ds0-group 0 timeslots 1-31 type none service mgcp
Async interfaces won`t go away they are still in the config, even when mgcp is active.
I can convert them to a Group-Async but then they still there.
This will be a voice only configuration I don`t need any modem stuff.
<show mgcp endpoint>
E1 S2/0 ds0-group 0 timeslots 1-31 type none
E1 S2/7 ds0-group 0 timeslots 1-31 type none
Can you give any advice how to disable async interfaces ?