Solved: How to connect a CISCO 2621 Router to the INTERNET ?

Didier1966 · ‎05-17-2010

Hello,

I would like to connect my CISCO 2621 to my CISCO WRT610N ROUTER that is connected to my Internet Service Provider.

I have internet on my CISCO WRT610N , but I would like to pass it true my CISCO 2621 , I have been reading the 2 BIG books from the CCNA , but the only thing I can do is pinging the CISCO WRT610N , when I try to ping or go to a external internet page (ex www.google.com) , it does not work.

Where can I find some examples on NAT and RIP or other things that can maybe help me.

I have just order a Cisco WIC-1DSU-T1 1-Port T1/Fractional T1 DSU/CSU WAN on eBAY , maybe what I try to do on F0/0 or F0/1 does not work ?

When I understand and are able to make it work , I would like to remove the CISCO WRT610 ROUTER and use the CISCO 2621 instead in my small lab.

Thank you for your help.

Best Regards,

Didier.

Ganesh Hariharan · ‎05-17-2010

Hello,

Thank you for your prompt reply

It seams I have no access to the above links , I will contact CISCO today , to update my profile / account.

But so far I can see this will be the place where I will find what I need.

Thank You again,

Best Regards,

Didier

Hi Didier,

Check out the below link for NAT and RIP/EIGRP configuration on Cisco routers

http://www.cisco.com/en/US/tech/tk648/tk361/technologies_tech_note09186a0080094e77.shtml

http://www.tomax7.com/mcse/cisco_routerconfig.htm

Hope to Help !!

Ganesh.H

View solution in original post

Leo Laohoo · ‎05-17-2010

Sample Configuration Using the ip nat outside source list Command
http://www.cisco.com/en/US/customer/tech/tk648/tk361/technologies_configuration_example09186a0080093f8e.shtml

Sample Configuration Using the ip nat outside source static Command
http://www.cisco.com/en/US/customer/tech/tk648/tk361/technologies_configuration_example09186a0080093f2f.shtml

Configuring Routing Information Protocol
http://www.cisco.com/en/US/customer/docs/ios/12_2/ip/configuration/guide/1cfrip.html

Don't forget to rate useful posts. Thanks.

Didier1966 · ‎05-17-2010

Hello,

Thank you for your prompt reply

It seams I have no access to the above links , I will contact CISCO today , to update my profile / account.

But so far I can see this will be the place where I will find what I need.

Thank You again,

Best Regards,

Didier

Ganesh Hariharan · ‎05-17-2010

Hello,

Thank you for your prompt reply

It seams I have no access to the above links , I will contact CISCO today , to update my profile / account.

But so far I can see this will be the place where I will find what I need.

Thank You again,

Best Regards,

Didier

Hi Didier,

Check out the below link for NAT and RIP/EIGRP configuration on Cisco routers

http://www.cisco.com/en/US/tech/tk648/tk361/technologies_tech_note09186a0080094e77.shtml

http://www.tomax7.com/mcse/cisco_routerconfig.htm

Hope to Help !!

Ganesh.H

Didier1966 · ‎05-18-2010

Hi Ganesh,

Thank you for this links , this one I can open

The second one is really interesting , I will try it this evening when I am back home.

Thank's again and Best Regards,

Didier