ok, so i have a few questions here, heres my configuration:

Latitude#sh run

Building configuration...

Current configuration : 1313 bytes

!

version 12.4

service timestamps debug datetime msec

service timestamps log datetime msec

no service password-encryption

!

hostname Latitude

!

boot-start-marker

boot-end-marker

!

enable secret 5 $1$jm7D$2033ztdVu9JCQJHmqXa18/

enable password lattitude

!

no aaa new-model

clock timezone MST -7

clock summer-time MDT recurring

no network-clock-participate slot 1

no network-clock-participate wic 0

ip cef

!

ip name-server 67.50.43.18

ip name-server 208.67.222.222

ip name-server 192.168.0.240

!

interface FastEthernet0/0

ip address 192.168.0.1 255.255.255.0

ip nat inside

ip virtual-reassembly

speed auto

full-duplex

!

interface FastEthernet0/1

ip address 63.77.110.171 255.255.255.0

ip nat outside

ip virtual-reassembly

speed auto

full-duplex

!

ip forward-protocol nd

ip route 0.0.0.0 0.0.0.0 63.77.110.1

!

!

ip http server

no ip http secure-server

ip nat pool overload 63.77.110.172 63.77.110.172 prefix-length 24

ip nat inside source list 1 pool overload overload

ip nat inside source static tcp 63.77.110.172 21 192.168.0.240 21 extendable

!

access-list 1 permit 192.168.0.0 0.0.0.255

!

!

!

control-plane

!

line con 0

line aux 0

line vty 0 4

password lattitude

login

!

ntp clock-period 17208029

ntp server 67.50.43.18

!

end

1 its up and working,however i attempted to map my ftp server through the router, and now i cant see the server on the network : ( (i probably need to just remove the entry but dont know how)

2 i need to remove some of the entries in my DNS field.

3 i need to map some ports through the NAT to allow an FTP server, web server, and remote desktop connections.

Message was edited by: Alex Bartz

my apologies, this is literally the first time ive messed with a cisco product, or any telnet interface for that matter, however im under some pressure to get this thing going so your patience and understanding is worth a million thanks

i placed a NAT entry in my router trying to forward some ports with an internet article, and right after i did the cntrl+z thing i couldnt access the server i was trying to get mapped. can you help me find, and delete the entry i made?

What was the entry you made?

Federico.

how would i figure that out? lol im so sorry i bet this is a huge pain. i have the manual for configuring cisco devices that ill be reading here soon but i have to have everything setup like 2 hours ago...

ok, i think i got it, man cisco make a freakin GUI for us non L33Ts!

Alex,

Which entry do you want to get rid of?

no ip nat pool overload 63.77.110.172 63.77.110.172 prefix-length 24

no ip nat inside source list 1 pool overload overload

no ip nat inside source static tcp 192.168.0.240 21 63.77.110.172 21 extendable

If you're not sure, you might just blow out the entire NAT configuration and start over.

What do you want to do?

Federico.

i got that part, now how would i set the first DNS server to 192.168.0.240? i already have it in the list, but its not default

Alex,

You mean the DNS server for the router itself?

If so, you can remove the DNS servers already specified:

no ip name-server 67.50.43.18

no ip name-server 208.67.222.222

no ip name-server 192.168.0.240

And enter the DNS server that you want.

Or, do you want the router to assign a DNS to the LAN?

Federico.

im using active directory, so it would need to tell clients to use 192.168.0.240 and it itself should be using 208.67.222.222 (open dns)

the ftp server worked before i switched routers, so its definately an issue im having with the router, why wont the ftp nat entry i put in work? do i need to apply something?

oh oh ok heh yes my server is doing all the dhcp functions, so no need there. i just need the first ip address that it looks for to be 192.168.0.240 and the second one for redundancy to be 208.67.222.222 so i know its set right, then i need to troubleshoot why in the world that port map didnt work? any thoughts? heres the configuration:

Latitude#sh run

Building configuration...

Current configuration : 1348 bytes

!

! Last configuration change at 17:24:31 MDT Mon May 17 2010

!

version 12.4

service timestamps debug datetime msec

service timestamps log datetime msec

no service password-encryption

!

hostname Latitude

!

boot-start-marker

boot-end-marker

!

enable secret 5 $1$jm7D$2033ztdVu9JCQJHmqXa18/

enable password ********

!

no aaa new-model

clock timezone MST -7

clock summer-time MDT recurring

no network-clock-participate slot 1

no network-clock-participate wic 0

ip cef

!

!

!

!

ip name-server 208.67.222.222

ip name-server 192.168.0.240

!

interface FastEthernet0/0

ip address 192.168.0.1 255.255.255.0

ip nat inside

ip virtual-reassembly

speed auto

full-duplex

!

interface FastEthernet0/1

ip address 63.77.110.171 255.255.255.0

ip nat outside

ip virtual-reassembly

speed auto

full-duplex

!

ip forward-protocol nd

ip route 0.0.0.0 0.0.0.0 63.77.110.1

!

!

ip http server

no ip http secure-server

ip nat pool overload 63.77.110.172 63.77.110.172 prefix-length 24

ip nat inside source list 1 pool overload overload

ip nat inside source static tcp 192.168.0.240 21 63.77.110.172 21 extendable

!

access-list 1 permit 192.168.0.0 0.0.0.255

!

!

!

control-plane

line con 0

line aux 0

line vty 0 4

password lattitude

login

!

ntp clock-period 17208029

ntp server 67.50.43.18

!

end