Best way to prioritise SIP traffic

Answered Question
May 18th, 2010
User Badges:

Hello community .


I have a set of ip phones sitting on the 192.168.11.0/24 Lan .

If I want to prioritise the SIP traffic getting in and out of thoses phones , can I use


ip access-list extended REALTIME


permit ip 192.168.11.0 0.0.0.255 any

permit ip any 192.168.11.0 0.0.0.255

deny ip any any


or is it better to use:


ip access-list extended REALTIME

permit ip any any eq 5060



Is matching only on the addressing part enough to get a match ?


Thanks

Correct Answer by Leo Laohoo about 6 years 11 months ago

QoS Configuration Examples
http://www.cisco.com/en/US/customer/products/hw/switches/ps5023/products_tech_note09186a0080883f9e.shtml


NOTE:  Not all switches support full QoS.


Don't forget to rate useful posts.  Thanks.

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 5 (1 ratings)
Loading.
Correct Answer
Leo Laohoo Tue, 05/18/2010 - 01:12
User Badges:
  • Super Gold, 25000 points or more
  • Hall of Fame,

    The Hall of Fame designation is a lifetime achievement award based on significant overall achievements in the community. 

  • Cisco Designated VIP,

    2017 LAN, Wireless

QoS Configuration Examples
http://www.cisco.com/en/US/customer/products/hw/switches/ps5023/products_tech_note09186a0080883f9e.shtml


NOTE:  Not all switches support full QoS.


Don't forget to rate useful posts.  Thanks.

Leo Laohoo Tue, 05/18/2010 - 02:05
User Badges:
  • Super Gold, 25000 points or more
  • Hall of Fame,

    The Hall of Fame designation is a lifetime achievement award based on significant overall achievements in the community. 

  • Cisco Designated VIP,

    2017 LAN, Wireless

Thanks for the ratings Thomas.

Actions

This Discussion