05-18-2010 01:06 AM - edited 03-04-2019 08:31 AM
Hello community .
I have a set of ip phones sitting on the 192.168.11.0/24 Lan .
If I want to prioritise the SIP traffic getting in and out of thoses phones , can I use
ip access-list extended REALTIME
permit ip 192.168.11.0 0.0.0.255 any
permit ip any 192.168.11.0 0.0.0.255
deny ip any any
or is it better to use:
ip access-list extended REALTIME
permit ip any any eq 5060
Is matching only on the addressing part enough to get a match ?
Thanks
Solved! Go to Solution.
05-18-2010 01:12 AM
QoS Configuration Examples
http://www.cisco.com/en/US/customer/products/hw/switches/ps5023/products_tech_note09186a0080883f9e.shtml
NOTE: Not all switches support full QoS.
Don't forget to rate useful posts. Thanks.
05-18-2010 01:12 AM
QoS Configuration Examples
http://www.cisco.com/en/US/customer/products/hw/switches/ps5023/products_tech_note09186a0080883f9e.shtml
NOTE: Not all switches support full QoS.
Don't forget to rate useful posts. Thanks.
05-18-2010 01:29 AM
Thanks !
rgds
T
05-18-2010 02:05 AM
Thanks for the ratings Thomas.
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: