RV082 + Zyxel modem can't connect

Unanswered Question
May 18th, 2010

hi all,

i've recently purchased a RV082, since we needed a reliable internet connection, the DUAL WAN did it for us

Unfortunately we have some problems with one of our ISP/Modem and hope you could help.

WAN1:

- Is via a Cable Provider,

- motorola modem to which i have no access

- apparently setup as "single use"

WORKS FINE!

WAN2:

- Zyxel P-2602HW-D1A

- various connection problems explained below.

When we first got the zyxel modem, it was set to DHCP + single use. The Cisco RV082 always received a internal IP 192.168... and never could resolve to a WAN adress. -> Hence we didn't get it to work.

We now had it changed to NAT Disabled + static WAN IP.

-> Cisco Router can connect, and the connection is established.

Unfortunately the connection is very very slow, we have DNS resolve issues, timeouts etc.

(All firewalls are disabled, no port forwarding/routing, etc.)

When i connect the Zyxel directly to my laptop, everything works fine!

I am in serious need for any tipps of how the setup the Zyxel modem and/or the RV082.

It works fine with the Motorola modem, so there must be a way.

any tipps, pls!

thanks

gabriel

I have this problem too.
0 votes
  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
Loading.

Actions

This Discussion

Related Content