DAVID ANDERSON Tue, 05/18/2010 - 06:10
User Badges:


Many thanks for your rapid response. I will have a read up on that now on how I get that implimented instead.

Jennifer Halim Tue, 05/18/2010 - 06:06
User Badges:
  • Cisco Employee,

You can configure IPSec VPN Client instead. It achieves the same where you connect to the PIX remotely via VPN to securely access resources behind the PIX firewall.

Here is a sample configuration for your reference:


You would need to install the Cisco IPSec VPN Client on the user PC.

Hope that helps.

Federico Coto F... Tue, 05/18/2010 - 06:10
User Badges:
  • Green, 3000 points or more


halijenn is correct.

However IPsec VPN client requires the installation of a software client (if you can do it, this is the recommended client).

As with PPTP, you can configure L2TP using the native windows VPN client without any additional software.


DAVID ANDERSON Tue, 05/18/2010 - 06:20
User Badges:
Hi halijenn,

Thanks also for your rapid response. The link will be a great help and will use it to setup remote access.

Thanks Dave.


This Discussion