Need to remove "TO" and "FROM" when calling to ip phones.

Unanswered Question
May 18th, 2010
User Badges:


Need to remove "TO" and "FROM" when calling to ip phones.when phone A Calls Phone B.its showing on Phone A Screen " TO A "  and on phone b

its showing "FROM B".I don't want to display  this TO AND FROM on the cisco ip phone screen How i can remove these two keywords .

Please guide me how i can do that.I shall be very thankfull to you.

if you requirement is not clear please let me know i will explain it again

best regards

Jamil Hussain

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
paolo bevilacqua Tue, 05/18/2010 - 08:00
User Badges:
  • Super Gold, 25000 points or more
  • Hall of Fame,

    Founding Member

Edited: one might try configure some sort of custom localization on the phones to change or nullify these.

Jamil Hussain Thu, 05/20/2010 - 16:56
User Badges:


I think there should be a way to remove "TO" and "FROM" Text

Jonathan Schulenberg Wed, 05/26/2010 - 10:29
User Badges:
  • Super Bronze, 10000 points or more
  • Cisco Designated VIP,

    2017 IP Telephony

I would suggest that you speak with your Cisco Account Manager who may submit a Product Enhacement Request on your behalf.

Jamil Hussain Wed, 05/26/2010 - 10:55
User Badges:

Hi schulenberg

As a voice engineer i should not ask such type of queries but i want to tell you that i already informed them that this is the Cisco default and There is no way to do this.

But you know My company Chairman saw it implemented some where thats why they asked me to do the same way

I don't have any problem with To and From Text showing during calling but this was request from my company chairman thats why i asked.


This Discussion