Radius authentication

Unanswered Question
May 18th, 2010

Dear All,


       anybody help in these issue,  I have 1140 wireless access point and i want to integrate with raidus server(windows 2003).  i Need to know that how i can generate certificate in 1140 wireless access point.


i complete all configuration just ia m getting this error.  Please any body guide me to complete this task.



i am facing problem for authentication and getting this error on  radius server.



User test  was granted access.
Fully-Qualified-User-Name = <undetermined> 
NAS-IP-Address = 10.1.5.7
NAS-Identifier = ap
Client-Friendly-Name = access point
Client-IP-Address = 10.1.5.7
Calling-Station-Identifier = 0021.0063.fb97
NAS-Port-Type =  Wireless - IEEE 802.11
NAS-Port = 341
Proxy-Policy-Name = Use  Windows authentication for all users
Authentication-Provider =  <none>
Authentication-Server = <undetermined>
Policy-Name = <undetermined>
Authentication-Type =  <undetermined>
EAP-Type = <undetermined>


For more  information, see Help and Support Center at


___________________________________-


An  Access-Request message was received from RADIUS client access point with  a message authenticator attribute that is not valid.


how i can integrate with radius.


regards,

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
Loading.
Ganesh Hariharan Thu, 05/20/2010 - 02:17

Dear All,


      anybody help in these issue,  I have 1140 wireless access point and i want to integrate with raidus server(windows 2003).  i Need to know that how i can generate certificate in 1140 wireless access point.


i complete all configuration just ia m getting this error.  Please any body guide me to complete this task.



i am facing problem for authentication and getting this error on  radius server.



User test  was granted access.
Fully-Qualified-User-Name =  
NAS-IP-Address = 10.1.5.7
NAS-Identifier = ap
Client-Friendly-Name = access point
Client-IP-Address = 10.1.5.7
Calling-Station-Identifier = 0021.0063.fb97
NAS-Port-Type =  Wireless - IEEE 802.11
NAS-Port = 341
Proxy-Policy-Name = Use  Windows authentication for all users
Authentication-Provider = 
Authentication-Server =
Policy-Name =
Authentication-Type = 
EAP-Type =


For more  information, see Help and Support Center at


___________________________________-


An Access-Request message was received from RADIUS client access point with  a message authenticator attribute that is not valid.


how i can integrate with radius.


regards,


Hi,


Check out the below link hope to Help !!


http://www.hansenonline.net/Networking/wlanradius.html


Hope to Help !!


Ganesh.H

Actions

This Discussion