somebody knows what is the minimun switch (talking about level of complex) to connect it to a access point controller 4402 (4 12 APs) ?
can be a 2960 LAN lite?
The problem is the low budget to the proyect.
Ok. You got a 4402 with 12 APs?
Firstly, you need to get a switch that can support Dot1Q trunking and with GigabitEthernet port (minimum of 1 and maximum of 2). The WLC will not support 10/100BaseTx and only 1Gbs. What SFP are you using? GLC-T, GLC-SX-MM, GLC-LH-SM?
Next issue is how is your AP going to get powered up. Do you need PoE or power injector?
So with this you have a good reference of what switch to get. You can start with Linksys un-managed switches to Cisco. With Cisco you can trawl e-bay for the most basic WS-C2950T if you are using GLC-T on the WLC. You can use 2950SX or 2950G if you are using GLC-SX-MM. 2950G if you are using GLC-LH-SM.
PS: If you need power supply for the 1130 or 1240 let me know (or earlier). I have a stack full and I'm willing to part with it!
If you can provide more information we can help you a bit more.
Don't forget to rate our posts if useful. Thanks.