cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
548
Views
0
Helpful
2
Replies

ACS 5.0 Engine integration with AD

mutambudzi
Level 1
Level 1

Could you please assist, I preparing to setup ACS 5.0 and integrate it with an external AD database. Would i need to make any configurations on the AD servers itself, and what settings do i need, if any?

PM.

2 Replies 2

Jatin Katyal
Cisco Employee
Cisco Employee

You don't need to do any changes on AD. Just make sure whatever admin credentials you are using on ACS to integrate with AD should have privileges to add computer on the domain.


Joining ACS to an AD Domain
http://www.cisco.com/en/US/docs/net_mgmt/cisco_secure_access_control_system/5.1/user/guide/users_id_stores.html#wp1140906

ACS 5.1 has to be configured with a valid NTP server for time synchronization, preferably from where the domain controller is syncing its time. Another one is a valid DNS server which can resolve internal names.

Both of them will be configured from the CLI:
http://www.cisco.com/en/US/partner/docs/net_mgmt/cisco_secure_access_control_system/5.1/command/reference/cli_use.html#wp1096003

ip name-server
http://www.cisco.com/en/US/partner/docs/net_mgmt/cisco_secure_access_control_system/5.1/command/reference/cli_app_a.html#wp1729536

Ntp server
http://www.cisco.com/en/US/partner/docs/net_mgmt/cisco_secure_access_control_system/5.1/command/reference/cli_app_a.html#wp1013780

HTH


JK


Do rate helpful posts-

~Jatin

JK,

Thanks so much. Will provide feedback or any other questions shortly.

PM

Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: