Question about ASR 1002 and SFP-GE-T modules

Answered Question
May 18th, 2010
User Badges:

Hi all I have asked two ASR 1002, but the true is that I never used / touch this boxes.


The idea is connect this two routers trough Metroethernet link but I am not sure if this interfaces with this Gbic modules  SFP-GE-T works 10/100/1000 or only works at 1000 like 4924 multilayer switches.

My current Metroethernet Link is just 10/100 FE

Somebody knows about that?

Thanks in advanced



Correct Answer by Reza Sharifi about 6 years 10 months ago

Hi Eduardo,


If it is 10/100/1000 then that is what it is.  it is not 10/100  10/100/1000 interface is copper not fiber


Reza

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 5 (1 ratings)
Loading.
Reza Sharifi Tue, 05/18/2010 - 19:18
User Badges:
  • Super Bronze, 10000 points or more
  • Cisco Designated VIP,

    2017 LAN

Hi,


That is Gig only.


HTH

Reza

eduardo.ramirez Wed, 05/19/2010 - 13:02
User Badges:

Hi Reza thanks for your response.. .


I heard from other Engineer that 10/100/1000 built-in interfaces are only capable of 10/100 using the copper SFP..


did you know abou that  ?


Thanks

Correct Answer
Reza Sharifi Wed, 05/19/2010 - 13:17
User Badges:
  • Super Bronze, 10000 points or more
  • Cisco Designated VIP,

    2017 LAN

Hi Eduardo,


If it is 10/100/1000 then that is what it is.  it is not 10/100  10/100/1000 interface is copper not fiber


Reza

chris.rae07 Wed, 05/19/2010 - 23:23
User Badges:

Guys,


I am just deploying a pair of ASR 1006.

I am using the SPA-5X1GE-V2 with both GLC-T and SMF SFPs


cisco ASR1006 (RP1) processor with 709790K/6147K bytes of memory.
10 Gigabit Ethernet interfaces
32768K bytes of non-volatile configuration memory.
2097152K bytes of physical memory.
942079K bytes of eUSB flash at bootflash:.
39004543K bytes of SATA hard disk at harddisk:.


Configuration register is 0x2102



This is with Autonegotiation enabled


Router(config-if)#

Router(config)#int g0/0/0
Router(config-if)#speed ?
  10    Force 10 Mbps operation
  100   Force 100 Mbps operation
  1000  Force 1000 Mbps operation


Router(config-if)#speed 100
Auto-negotiation is enabled. Speed cannot be set


Turning off Autonegotiation


Router(config-if)#no negotiation auto

Router(config-if)#speed 100

Router(config-if)#speed 1000


Hope this helps

Chris

Actions

This Discussion