1841 router

Unanswered Question
May 18th, 2010
User Badges:

we are going to use cisco 1841 router. i want to configure leased line inthis router .i will be connecting the local lan in fast ethernet 0/0 with ip 10.10.10.1 subnet 255.0.0.0 and i will be connecting the leased line in the serial port with ip 94.56.xxx.xxx subnet 255.255.255.252. help me to configure this  router .pls provide me the command to configure this router.

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
Loading.
Giuseppe Larosa Wed, 05/19/2010 - 00:09
User Badges:
  • Super Silver, 17500 points or more
  • Hall of Fame,

    Founding Member

Hello Viraj,


using a /24 mask is better for LAN:


you need to use NAT to provide internet access


int fas0/0

ip address 10.10.10.1 255.255.255.0

ip nat inside


int ser0/0

ip address 94.56.x.y 255.255.255.252

ip nat outside


access-list 11 permit 10.10.10.0 0.0.0.255


ip nat inside source list 11 interface ser0/0 overload


ip route 0.0.0.0 0.0.0.0 94.56.x.z


! where 94.56.x.z is the next-hop on the wan interface


Hope to help

Giuseppe

Actions

This Discussion