Jennifer Halim Wed, 05/19/2010 - 02:11

Yes, it is OK for failover.

Just have to make sure that hardware, software and any other license that you have is exactly the same between the 2 ASAs to run failover. If you have module installed, both ASAs need to have the same module too installed.

Hope that helps.

mgnmgnmgn Wed, 05/19/2010 - 19:04

Thx halijenn.i had check the hardware they are totally the same.

Will study the failover procedure and the AIM-SSM module.

thanks a lot.




This Discussion