gpickup softkey not working on 504

Steven Howes · ‎05-19-2010

Hi,

I have an SPA504G firmware 7.4.4.

Here are relevant options:

I put 'dnd' and 'dir' either side of it to see what happened. The keys took place 3 and 4 so it is like it isnt seeing the button as being defined. I've tried giving it a specific position, as well as removing all other keys. Does anyone have any ideas? I'm a bit stumped... Admin guide barely mentions group pickup. If all else fails I suppose I can use a custom PSK but I'd rather not use them up on things that are supposedly already implemented.

Thanks in advance

Patrick Born · ‎05-19-2010

Hi Steve,

The images in your post don't display for me. I'm betting that you're not using SPA9000 or Sylantro.

Please take a look at: https://www.myciscocommunity.com/message/48181#48181 which addresses the same issue.

Regards,

Patrick

-----------

Kyritsich · ‎11-10-2010

Hi,

1 SPA504g(SIP protocol in CME)

Call pickup group and Call pick up does not work.

If you try to do a call pickup or call pick up group the phone displays "gathering call info" and nothing happens.

Any quick setting that must be on or off somewhere for this to work ?

Thanks

Dan Lukes · ‎03-31-2014

Note that https://www.myciscocommunity.com/message/48181#48181 no longer exists.

Use https://communities.cisco.com/message/48181#48181 instead.

Link above become accessible to authorized users only. Thank you, Cisco ...