ASA 5550 port channel

Answered Question
May 19th, 2010

Hi

Is it possible to bundle two ASA interfaces to port-channel interface?

Thanks,

D.

Correct Answer by Jon Marshall about 6 years 9 months ago

darijohorvat wrote:

Hi

Is it possible to bundle two ASA interfaces to port-channel interface?

Thanks,

D.

D

Not it's not. The ASA does not support etherchannel.

Jon

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 5 (2 ratings)
Loading.
Correct Answer
Jon Marshall Wed, 05/19/2010 - 08:50

darijohorvat wrote:

Hi

Is it possible to bundle two ASA interfaces to port-channel interface?

Thanks,

D.

D

Not it's not. The ASA does not support etherchannel.

Jon

don-robbery Tue, 06/07/2011 - 19:14

Hi darijohorvat

Cisco ASA release 8.4(1) added support for LACP.  EtherChannel is now a support option.

EtherChannel support (ASA 5510 and higher)


You can configure up to 48 802.3ad EtherChannels of eight active interfaces each.


Note You  cannot use interfaces on the 4GE SSM, including the integrated 4GE SSM  in slot 1 on the ASA 5550, as part of an EtherChannel.


We introduced the following commands: channel-group, lacp port-priority, interface port-channel, lacp max-bundle, port-channel min-bundle, port-channel load-balance, lacp system-priority, clear lacp counters, show lacp, show port-channel.

Regards

Donald

Actions

This Discussion