Solved: ASA 5550 port channel

darijohorvat · ‎05-19-2010

Hi

Is it possible to bundle two ASA interfaces to port-channel interface?

Thanks,

D.

Jon Marshall · ‎05-19-2010

darijohorvat wrote:

Hi

Is it possible to bundle two ASA interfaces to port-channel interface?

Thanks,

D.

D

Not it's not. The ASA does not support etherchannel.

Jon

View solution in original post

Jon Marshall · ‎05-19-2010

darijohorvat wrote:

Hi

Is it possible to bundle two ASA interfaces to port-channel interface?

Thanks,

D.

D

Not it's not. The ASA does not support etherchannel.

Jon

darijohorvat · ‎05-19-2010

Thanks!

BR,

D.

johnsondnz · ‎06-07-2011

Hi darijohorvat

Cisco ASA release 8.4(1) added support for LACP. EtherChannel is now a support option.

EtherChannel support (ASA 5510 and higher)

You can configure up to 48 802.3ad EtherChannels of eight active interfaces each.

Note You cannot use interfaces on the 4GE SSM, including the integrated 4GE SSM in slot 1 on the ASA 5550, as part of an EtherChannel.

We introduced the following commands: channel-group, lacp port-priority, interface port-channel, lacp max-bundle, port-channel min-bundle, port-channel load-balance, lacp system-priority, clear lacp counters, show lacp, show port-channel.

Regards

Donald