Hi,

My SRW2016 keeps rebooting after upgrading, I guess something went wrong...

He is what the console says:

------ Performing the Power-On Self Test (POST) ------

UART Channel Loopback Test........................PASS

Testing the System SDRAM..........................PASS

Boot1 Checksum Test...............................PASS

Boot2 Checksum Test...............................FAIL

Flash Image Validation Test.......................PASS

BOOT Software Version 1.0.1 Built  11-Jun-2006  18:43:59

:::
:::        ::: :::       ::: :::     :::::  :::::::::: :::      ::: ::::::::::
:::        ::: :::::     ::: :::   :::::   ::::     ::: ::::  :::: ::::     :::
:::        ::: ::: :::   ::: ::::::::      ::::          ::::::::  ::::
:::        ::: :::   ::  ::: ::::::::::     ::::::::::     ::::     ::::::::::
:::        ::: :::    :::::: :::    ::::            :::    ::::             :::
:::::::::: ::: :::      :::: :::      :::: :::......:::    ::::    :::......:::
......... ... ...       ... ...       .... ..........     ....     ..........

Linksys SmartSwitch based on 88E6218 with ARM946E-S.
64 MByte SDRAM. I-Cache 8 KB. D-Cache 8 KB. Cache Enabled.

Autoboot in 2 seconds - press RETURN or Esc. to abort and enter prom.
Preparing to decompress...
100%Image in address: 0x0 - Check Sum error!
Please download a new image.

Downloading code using XMODEM.
Download failed

Perform WARM BOOT ...

I've tried loading firmwares srw2016-24-10086.ros, ls20xx_salsa-12222.ros and ls20xx-12230.ros but it doesn't want to take any of them.

Does anyone have a suggestion to solve this issue ?

Thanks.